BKL 200 DUO EF
- Stable low temperature that is constantly available without significant fluctuations
- Reaches extremely low temperatures due to the powerful agitator motor
- Hygienic design, enclosed system, no contact with the open air
- Fitted with an Ice Mass Sensor which prevents freezing
- Eco-friendly due to the R290 refrigerant
- Suitable for high ambient temperatures
- Can be connected in series for lower temperatures and in parallel for a high processing speed
- Two cooling units that can be activated independently of each other
- Simple to connect
| Technical specifications | BKL 200 ICE EF HEAVY DUTY | BKL 200 ICE EF | BKL 200 DUO EF |
|---|---|---|---|
| Capacity The number of litres per hour that can be re-cooled to 15 degrees Celsius (non-recurrent) | 40-250 L/HOUR | 40-150 L/HOUR | 40-400 L/HOUR |
| Continuous capacity The number of litres per hour that can be continuously re-cooled to 15 degrees Celsius | 110 L/HOUR | 80 L/HOUR | 160 L/HOUR |
| Chilling capacity The chilling power expressed in Watts | 1700 W | 1125 W | 2250 W (2 x 1125 W) |
| Temperature with one unit The lowest re-cooling temperature | 1,5 ºC - 3ºC | 1,5 ºC - 3ºC | 0,5 ºC - 3ºC |
| Processing speed The highest number of litres per minute that can be processed through heat exchangers | 12-20 L/MIN | 12-20 L/MIN | 12-30 L/MIN |
| Compressor The power of the compressor, expressed in hp (horse power) | 2 x ⅜ HP | ½ HP | 1 HP (2 x ½ HP) |
| Coolant The chemical substance used to transport heat | R290 | R290 | R290 |
| Refrigerant quantity: The total amount of refrigerant (R290) charged to the cooling system | 2 x 94 grams | 125 grams | 2 x 125 grams |
| Ice mass The maximum weight of the cold buffer, accumulated at rest (extra capacity) | 40 KG | 40 KG | 80 KG (2 x 40 KG) |
| Net volume of water bath The maximum content of the water bath (the water is only for cold transfer) | 72 LITRES | 72 LITRES | 144 LITRES (2 x 72 LITRES) |
| Waterinlet The diameter of the ingoing and outgoing water connections | R ½" | R ½" | R ½" |
| Electricity The required connected loads with which the device should be connected to the electrical network (please note: this may differ per country, region, or production environment) | 220-240 VAC / 50 Hz | 220-240 VAC / 50 Hz | 220-240 VAC / 50 Hz |
| Power consumption The required connected loads with which the device should be connected to the electrical network (please note: this may differ per country, region, or production environment) | 870 W | 650 W | 2 x 650 W |
| Current The required connected loads with which the device should be connected to the electrical network (please note: this may differ per country, region, or production environment) | 5,6 A | 4,2 A | 2 x 4,2 A |
| Waterpressure The minimum and maximum continuous water pressure that is required for the optimum operation of the device in kg per cm2 / bar | 1-5 KG/CM² | 1-5 KG/CM² | 1-5 KG/CM² |
| Maximum test pressure The maximum pressure at which the device has been tested | 16 KG/CM² | 16 KG/CM² | 10 KG/CM² |
| Net weight The weight of the machine, excluding water and packaging | 82 KG | 71 KG | 95 KG |
| Dimensions (L x W x H)The dimensions of the machine, excluding connections | 50 x 53.5 x 90.5 CM | 50 x 53.5 x 87 CM | 100 x 53.5 x 94 CM |
